Features and use attention of precision manual stage

Manual precision displacement platform provides domestic manual translation platform products with the largest variety, best performance and highest accuracy, including: translation platform, lifting platform, rotating platform, angle translation platform, tilt platform (including pitch and yaw), etc. Each type of product is divided into multiple series according to the main material, guide rail form, structural characteristics, driving mode, etc.

Compared with electric products, the structure of manual stage is relatively simple. In terms of structure, manual stage is mainly divided into main part (moving plate, fixed plate), driving mechanism (centimeter card or thread pair), guiding mechanism (guide rail), and resetting. Mechanism (return spring), locking mechanism and other parts.

1. Features of precision manual stage:

1. The guide rail is a linear ball and finely ground steel rod, which has a lighter load;

2. The precision machined base and table make the straightness, yaw, pitch and parallelism of movement of the table within a certain accuracy range;

3. Displacement adjustment adopts fine-grinding and fine-tuning thread pair drive;

4. The small adjustment amount ensures the micro feed of the table;

5. The fine-tuning thread pair is placed in the center of the translation table, which is easy to operate;

6. Spring reset is used to eliminate the axial gap;

7. Mounting holes with standard hole spacing are distributed on the table and base, which is convenient for installation and combination.

2. Precautions for the use of manual precision displacement platform

1. Use the two fixing screw holes or mounting brackets at the bottom, according to the needs of the site and machine installation space facilities, direct installation or additional protection or other mechanical use.

2. Pay attention to the outlet angle of the traction rope during installation, that is, try to make the mechanism of the traction rope from the outlet to the moving part slide straight during work, and try to keep the angle deviation to the minimum to ensure the measurement accuracy and the life of the cable. For long-stroke vertical installation, it is recommended that the rope ruler body be installed at the bottom and the traction rope is pulled upwards.

3. The traction rope itself is made of stainless steel and coated with fluorine layer. Please don't let it be burned, cut or hit by external force: excessive accumulation of debris, dust or items that can damage the rope are stored in the pulley or The outlet will cause damage to the steel cable and cause malfunctions.

4. If it is not installed in front of a fixed seat or workbench, it is forbidden to pull the steel cable out by hand or other products and let it bounce back instantly. This will cause the steel cable to break and damage the body structure and personal safety.

5. If it is used in a non-linear motion mechanism, please install an appropriate pulley for operation, and bundle the curved motion into a linear motion. For use in harsh environments or special occasions, please install a protective mechanism by yourself.